PROGRAMMABLE LOGIC CONTROLLER (PLC): ADVANCED AND APPLICATED

PROGRAMMABLE LOGIC CONTROLLER (PLC): ADVANCED AND APPLICATED (75% praktek)
Yogyakarta | 22 – 25 Juni 2015 | Rp 8.500.000/person
Yogyakarta | 06 – 09 July 2015 | Rp 8.500.000/person
Yogyakarta | 03 – 06 August 2015 | Rp 8.500.000/person
Yogyakarta | 28 September – 01 October 2015 | Rp 8.500.000/person
Yogyakarta | 05 – 08 October 2015 | Rp 8.500.000/person
Jadwal Training 2015 Selanjutnya …

TUJUAN :

Kursus ini memberikan pemahaman lebih kompleks terhadap PLC, peserta akan mendapatk an pengetahuan mengenai  variasi perintah pemrograman dan juga penulisan pemrograman yang digunakan didalam : I/O devices, BCD thumbwell switches, stepper motors, optical rotary encoder, dll. Kursus ini 75 % merupakan praktek.

CAKUPAN MATERI TRAINING PLC:

1. Basics refresher (Logic and software).
2. Advanced bit level instructions (One Shot Rising, Latch, Unlatch, Status bits, etc).
3. Digital number / match operations (Binary, Octal, Hexadecimal, BCD).
4. BCD I/O devices.
5. Data handling instructions (Shift registers, Sequencers, FIFO, LIFO)
6. Program flow instructions (Subroutines, Jumps, MCR’s)
7. World level logic operations.
8. Immediate I/O.
9. High speed counters.
10.  Analog Inputs.
11. Analog Outputs.
12.  Practice and interactive discussion

SIAPA SEBAIKNYA MENGIKUTI TRAINING INI?:

1. D3 Elektro atau SLTA yang berpengalaman kerja minimal 3 tahun, dan atau setara.
2. Teknisi, Operator dan Supervisor yang memiliki basic computer skills dan familiar dengan basic electrical concept.
3. Mereka yang dalam tugasnya berhubungan dan atau terkait dengan materi kursus.
4. Semua pihak yang ingin memahami topik ini

INSTRUCTOR : 

Tugino, ST.,MT. dan Tim

Tugino,ST.,MT. was graduated from electrical engineering Universitas Gadjah Mada,UGM Yogyakarta. He is lecturer at electrical engineering STTNAS Yogyakarta, for some subjects such as robotics, control engineering, Programmable Logic Controller(PLC), computer network, instrumentation and measurement, electric installation. And also as lecturer at mechanical engineering UJB Yogyakarta for subject electrical power engineering. Mr. Tugino,ST.,MT.  is active training instructor, he has been delivering industrial training class to many companies in Indonesia for some subjects such as: Electrical Safety, DCS Operation and Maintenance, Genset Operation and Maintenance, Logic Control for Industry, Fundamental of Electrical, Advanced Process Control, PLC  SIEMEN  S7, Basic Telecommunication PABX, Audit Energi Listrik, Electrical Instalation in Hazardus Area, Low and Medium Voltage Switchgear, Cable  Fault Location  for  Testing of  Underground Power Cable, Protection of Electrical Power System, Building Maintenance Management, Generator and Excitation Operation and Maintenance, Lighning Protection and Grounding System, Basic Instrumentation and Control, Power Distribution System Protection, PLC Programmable Logic Controller (PLC) using Siemen, Electrical & Mechanical Safety, Work at Height Scaffolding Safety, SCADA (Supervisory Control and Data Accuisition), Motor Maintenance and control, Control Valve and Instrumentation, And many others. Many companies has been becoming as participants in his training class such as:  Chevron Indonesia Company, PT Indocemen Cirebon dan PT Pertamina Limau, PT OCI Melamin Kaltim, PT total E&P Kaltim, PT Kodeko Pertamina, Indocemen  Kalsel  dan  PT  Pupuk  Kujang,  PT Petrokimia Gresik,  CNOOC SES  Ltd, ,PT Chevron Geothermal Drajat, PT MAK Kalasan dan  PT Pertamina Prabumulih, PT Kaltim Industrial Estate, PT Star Energy Bandung , PT Pertamina (Kedeco) Gresik, PT Telkom Bandung, PT Margaria Group Yogya, PT Nusa Halmahera Mineral, PT Tambang Bukit Asam, PT Star Energy Bandung, Politeknik Aceh, PT KPI Kaltim, PT Medco Palembang, PT Pertamina Cirebon ,PT Timah Bangka, PT PJB Bali, Refinery Cilegon,PT Chevron Duri dan Drajat , PT PKT Kaltim,PT INALUM Medan, PT Petrokimia Gresik, PT PJB PLN Gresik, PT Chevron Drajat, PT Pertamina Jawa Timur ,PT Semen gresik &   PT YTL Jatim, PT  Sari Husada Yogyakarta,  PT Pupuk Kujang, Iros PTD Irak,PT Petrochina Jambi, PT PJB Gresik, PT Kaltim Prima Coal, PT Semen Hocim Cilacap, PT Badak LNG Kaltim , PT. YTL Paiton Jawatimur,PT  Star  Energy Bandung, Medco Sumatra, PT Sriboga Semarang,PT PLN UJB Cirata, PT Indonesia Power Semarang, PT Indonesia Power Grati, PT Indonesia Power Semarang, PT DSM Kaltim, PT. Pertamina Learning Center, PT. PUSRI Palembang, PT. VICO Indonesia Kaltim, PT Kaltim Pasific Amoniak , UDIKLAT/PUSDIKLAT PLN (Medan, Palembang, Jakarta, Semarang, Surabaya, Makasar),  PT  Chevron  salak  dan  PT   Indonesia   Power semarang,   PT. IPMOMI Paiton, PT Chevron Garut, PTP,  PT PetroChina Sorong, , PT PERTAMINA Aceh, PT Pertamina Cilacap,  PT PERTAMINA Dumai, PT AZET Surya Lestari, PT Panca Manunggal Semarang, PG Jatiroto Lumajang Jatim and others.

VENUE

Yogyakarta (Jogjakarta plaza hotel/Ibis hotel yogyakarta/Ibis Styles yogyakarta hotel/Mutiara hotel/ Melia Purosani hotel)

TRAINING DURATION :

4 hari

WAKTU TRAINING PLC :  
6. 22 Jun 2015-25 Jun 2015
7. 06 Jul 2015-09 Jul 2015
8. 03 Aug 2015-06 Aug 2015
9. 28 Sep 2015-01 Oct 2015
10. 05 Oct 2015-08 Oct 2015
11. 23 Nov 2015-26 Nov 2015
12. 30 Nov 2015-03 Dec 2015

INVESTASI TRAINING PLC :

1. Rp. 8.500.000/person (full fare) or
2. Rp. 8.250.000/person (early bird, payment 1 week before training) or
3. Rp. 7.950.000/person (if there are 3 persons or more from the same company)

FACILITIES FOR PARTICIPANTS :

1. Modul Training
2. Flashdisk Training berisi materi training
3. Sertifikat
4. ATK: NoteBook dan Ballpoint
5. T-Shirt
6. Ransel
7. Foto Training
8. Ruang Training dengan fasilitas Full AC dan multimedia
9. Makan siang dan 2 kali coffeebreak
10.  Instruktur yang Qualified di bidang PLC
11. Transportasi untuk peserta dari hotel penginapan ke hotel tempat training – PP (jika peserta minimal dari satu perusahaan ada 4 peserta)

cforms contact form by delicious:days